PRODUCT QUALITY IMPROVEMENT CHANNEL C AT PT. SINARINDO MEGAH PERKASA WITH SIX S

https://doi.org/10.36441/seoi.v5i2.1912

Penulis

  • Hashemi Berthshanda Herman Program Studi Teknik Industri, Fakultas Teknik, Universitas Sahid Jakarta
  • Soecahyadi Soecahyadi Program Studi Teknik Industri, Fakultas Teknik, Universitas Sahid Jakarta
  • Siti Aminatu Zuhria Program Studi Teknik Industri, Fakultas Teknik, Universitas Sahid Jakarta

Kata Kunci:

Channel C, Product Quality, Six Sigma

Abstrak

In the current era of global competition, many companies were looking for alternative solutions to compete with other companies in order to survive in competition, one of which is by improving product quality. Product quality can be seen from the number of defective products produced by the   product.   This   study   aimed   to analyze Channel C defective products at PT. Sinarindo Megah Perkasa in order to improve its quality. The data used is Channel C production from 2015-2022 with a total production of 3,860 products with 73 defective products. The results showed that the causes of defective products in Channel C came from several factors which were analyzed using a fishbone diagram including machine, human, environmental, method, and material factors. The DPMO value obtained was 56,735.75 with a sigma level of 3.0828. The recommended improvements were to carry out regular maintenance on the machine, make notes on the size of the machine roll, add people for Quality Control , make Standard Operating Procedures (SOP), and provide detailed training to operators after the SOP is implemented.

Diterbitkan

2023-10-01

Terbitan

Vol 5 No 2 (2023): Jurnal Sustainable Environment Optimizing Industri (SEOI) 2023

Bagian

Artikel
Copyright & Licensing

Hak publikasi atas semua materi informasi yang tercantum dalam situs jurnal ini dipegang oleh dewan redaksi/editor dengan sepengetahuan penulis. Pengelola Jurnal akan menjunjung tinggi hak moral penulis.

Aspek legal formal terhadap akses setiap informasi dan artikel yang tercantum dalam situs jurnal ini mengacu pada ketentuan lisensi Creative Commons Atribusi-NonCommercial-No Derivative (CC BY-NC-ND), yang berarti bahwa hanya dengan izin penulis, informasi dan artikel Jurnal Jurnal Sustainable Environment Optimizing Industri (SEOI) dapat didistribusikan ke pihak lain dengan tanpa merubah bentuk aslinya untuk tujuan non-komersial.

Setiap terbitan Jurnal Sustainable Environment Optimizing Industri (SEOI), bersifat open access untuk tujuan pendidikan, penelitian, dan perpustakaan. Di luar tujuan tersebut, penerbit atau pengelola jurnal tidak bertanggung jawab atas terjadinya pelanggaran hak cipta yang dilakukan oleh pembaca atau pengakses.